byp4a55 professor6T9

Linux host69.registrar-servers.com 4.18.0-513.18.1.lve.2.el8.x86_64 #1 SMP Sat Mar 30 15:36:11 UTC 2024 x86_64
Apache
68.65.123.79

introduction.rst

.. _distutils-intro:

****************************
An Introduction to Distutils
****************************

.. include:: ./_setuptools_disclaimer.rst

This document covers using the Distutils to distribute your Python modules,
concentrating on the role of developer/distributor: if you're looking for
information on installing Python modules, you should refer to the
:ref:`install-index` chapter.

.. _distutils-concepts:

Concepts & Terminology
======================

Using the Distutils is quite simple, both for module developers and for
users/administrators installing third-party modules.  As a developer, your
responsibilities (apart from writing solid, well-documented and well-tested
code, of course!) are:

* write a setup script (:file:`setup.py` by convention)

* (optional) write a setup configuration file

* create a source distribution

* (optional) create one or more built (binary) distributions

Each of these tasks is covered in this document.

Not all module developers have access to a multitude of platforms, so it's not
always feasible to expect them to create a multitude of built distributions.  It
is hoped that a class of intermediaries, called *packagers*, will arise to
address this need.  Packagers will take source distributions released by module
developers, build them on one or more platforms, and release the resulting built
distributions.  Thus, users on the most popular platforms will be able to
install most popular Python module distributions in the most natural way for
their platform, without having to run a single setup script or compile a line of
code.

.. _distutils-simple-example:

A Simple Example
================

The setup script is usually quite simple, although since it's written in Python,
there are no arbitrary limits to what you can do with it, though you should be
careful about putting arbitrarily expensive operations in your setup script.
Unlike, say, Autoconf-style configure scripts, the setup script may be run
multiple times in the course of building and installing your module
distribution.

If all you want to do is distribute a module called ``foo``, contained in a
file :file:`foo.py`, then your setup script can be as simple as this::

from distutils.core import setup
   setup(name='foo',
         version='1.0',
         py_modules=['foo'],
         )

Some observations:

* most information that you supply to the Distutils is supplied as keyword
  arguments to the :func:`~distutils.core.setup` function

* those keyword arguments fall into two categories: package metadata (name,
  version number) and information about what's in the package (a list of pure
  Python modules, in this case)

* modules are specified by module name, not filename (the same will hold true
  for packages and extensions)

* it's recommended that you supply a little more metadata, in particular your
  name, email address and a URL for the project (see section :ref:`setup-script`
  for an example)

To create a source distribution for this module, you would create a setup
script, :file:`setup.py`, containing the above code, and run this command from a
terminal::

python setup.py sdist

For Windows, open a command prompt window (:menuselection:`Start -->
Accessories`) and change the command to::

setup.py sdist

:command:`sdist` will create an archive file (e.g., tarball on Unix, ZIP file on Windows)
containing your setup script :file:`setup.py`, and your module :file:`foo.py`.
The archive file will be named :file:`foo-1.0.tar.gz` (or :file:`.zip`), and
will unpack into a directory :file:`foo-1.0`.

If an end-user wishes to install your ``foo`` module, all they have to do is
download :file:`foo-1.0.tar.gz` (or :file:`.zip`), unpack it, and---from the
:file:`foo-1.0` directory---run ::

python setup.py install

which will ultimately copy :file:`foo.py` to the appropriate directory for
third-party modules in their Python installation.

This simple example demonstrates some fundamental concepts of the Distutils.
First, both developers and installers have the same basic user interface, i.e.
the setup script.  The difference is which Distutils *commands* they use: the
:command:`sdist` command is almost exclusively for module developers, while
:command:`install` is more often for installers (although most developers will
want to install their own code occasionally).

Other useful built distribution formats are RPM, implemented by the
:command:`bdist_rpm` command, Solaris :program:`pkgtool`
(:command:`bdist_pkgtool`), and HP-UX :program:`swinstall`
(:command:`bdist_sdux`).  For example, the following command will create an RPM
file called :file:`foo-1.0.noarch.rpm`::

python setup.py bdist_rpm

(The :command:`bdist_rpm` command uses the :command:`rpm` executable, therefore
this has to be run on an RPM-based system such as Red Hat Linux, SuSE Linux, or
Mandrake Linux.)

You can find out what distribution formats are available at any time by running
::

python setup.py bdist --help-formats

.. _python-terms:

General Python terminology
==========================

If you're reading this document, you probably have a good idea of what modules,
extensions, and so forth are.  Nevertheless, just to be sure that everyone is
operating from a common starting point, we offer the following glossary of
common Python terms:

module
   the basic unit of code reusability in Python: a block of code imported by some
   other code.  Three types of modules concern us here: pure Python modules,
   extension modules, and packages.

pure Python module
   a module written in Python and contained in a single :file:`.py` file (and
   possibly associated :file:`.pyc` files).  Sometimes referred to as a
   "pure module."

extension module
   a module written in the low-level language of the Python implementation: C/C++
   for Python, Java for Jython. Typically contained in a single dynamically
   loadable pre-compiled file, e.g. a shared object (:file:`.so`) file for Python
   extensions on Unix, a DLL (given the :file:`.pyd` extension) for Python
   extensions on Windows, or a Java class file for Jython extensions.  (Note that
   currently, the Distutils only handles C/C++ extensions for Python.)

package
   a module that contains other modules; typically contained in a directory in the
   filesystem and distinguished from other directories by the presence of a file
   :file:`__init__.py`.

root package
   the root of the hierarchy of packages.  (This isn't really a package, since it
   doesn't have an :file:`__init__.py` file.  But we have to call it something.)
   The vast majority of the standard library is in the root package, as are many
   small, standalone third-party modules that don't belong to a larger module
   collection. Unlike regular packages, modules in the root package can be found in
   many directories: in fact, every directory listed in ``sys.path`` contributes
   modules to the root package.

.. _distutils-term:

Distutils-specific terminology
==============================

The following terms apply more specifically to the domain of distributing Python
modules using the Distutils:

module distribution
   a collection of Python modules distributed together as a single downloadable
   resource and meant to be installed *en masse*.  Examples of some well-known
   module distributions are NumPy, SciPy, Pillow,
   or mxBase.  (This would be called a *package*, except that term is
   already taken in the Python context: a single module distribution may contain
   zero, one, or many Python packages.)

pure module distribution
   a module distribution that contains only pure Python modules and packages.
   Sometimes referred to as a "pure distribution."

non-pure module distribution
   a module distribution that contains at least one extension module.  Sometimes
   referred to as a "non-pure distribution."

distribution root
   the top-level directory of your source tree (or  source distribution); the
   directory where :file:`setup.py` exists.  Generally  :file:`setup.py` will be
   run from this directory.

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/linksafe	0755	2026-02-07 09:54:50
..	dir	-	root/linksafe	0755	2026-02-07 09:54:50
_setuptools_disclaimer.rst	text/plain	232 B	root/linksafe	0644	2023-11-21 07:00:33
apiref.rst	text/plain	93.54 KB	root/linksafe	0644	2023-11-21 07:00:33
builtdist.rst	text/plain	18.89 KB	root/linksafe	0644	2023-11-21 07:00:33
commandref.rst	text/x-tex	4.48 KB	root/linksafe	0644	2023-11-21 07:00:33
configfile.rst	text/plain	5.8 KB	root/linksafe	0644	2023-11-21 07:00:33
examples.rst	text/plain	10.01 KB	root/linksafe	0644	2023-11-21 07:00:33
extending.rst	text/x-tex	4.48 KB	root/linksafe	0644	2023-11-21 07:00:33
index.rst	text/plain	1.23 KB	root/linksafe	0644	2023-11-21 07:00:33
introduction.rst	text/plain	7.88 KB	root/linksafe	0644	2023-11-21 07:00:33
packageindex.rst	text/plain	431 B	root/linksafe	0644	2023-11-21 07:00:33
setupscript.rst	text/plain	30.6 KB	root/linksafe	0644	2023-11-21 07:00:33
sourcedist.rst	text/plain	9.51 KB	root/linksafe	0644	2023-11-21 07:00:33
uploading.rst	text/plain	246 B	root/linksafe	0644	2023-11-21 07:00:33

Team Anon Force

https://t.me/Professor6T9x